2020/09/10 (Day 2)

Zoom-A

A21 Seminar on compressor technology 1 09:40 〜 10:40
A211 Horizontal Refrigerated Display Cabinets SR-JF,FF F-Series

JITSUKAWA Kenichi (Mitsubishi Electric Applied Refrigeration Systems), ◯ HOSAKA Keiko, SUGIMOTO Takeshi, KIMURA Naoki, ISHIKAWA Tomotaka (Mitsubishi Electric)
A212 Feed-Water Heating Heat Pump Unit using Waste Heat

◯ OTANI Kazuyuki (MIURA), TANAKA Yasukuni, TAKEMOTO Masanori, SUGIURA Rikki, OZAWA Tomoya
A213 Natural Refrigerant (NH3/CO2) Chilling Package for Mid/ Small Scale Facilities SIERRA

◯ SATO Shinnosuke (MAYEKAWA MFG.), KITAYAMA Hidehiro, MITSUMOTO Yuki

A22 Seminar on compressor technology 2 11:10 〜 12:30
A221 Development of an Air-source Heat Pump using low-GWP Refrigerants to Heat Circulation Water

◯ SASAYA Yugo (Mitsubishi Heavy Industries Thermal Systems), OKADA Yuji
A222 Development of Hybrid Commercial Dehumidifier (DEH-SP3A) Consisted of Desiccant Honeycomb Block

◯ TANAKA Manabu (Mitsubishi Electric), OKAJIMA Keigo, ITO Shinichi, FUJIMOTO Hajime
A223 Development Example of Portable Cooling Device

◯ MIYATA Keisuke (OHM ELECTRIC), OHGATA Tomohiko
A224 Introduction of Air Conditioning System for Aircraft

◯ URYU Shoji (Shimadzu)

A23 Seminar on compressor technology 3 13:30 〜 14:30
A231 An Overview of Heat Driven Thermoacoustic Refrigerator using Inert Gas

◯ HASEGAWA Shinya (Tokai Univ.), SENGA Mariko
A232 Development of Hybrid Hot Water Supply System Adopting R290

◯ ISHIBASHI Masaaki (Noritz), YAMANE Shota, KENBISHI Soshi, INAMOTO Tatumi, IWAHASHI Yoshinori
A233 Introduction of Air Refrigeration System using Reverse Brayton Cycle

◯ UEDA Shota (Mayekawa MFG), MACHIDA Akito, KUDO Mizuo

Zoom-B

B21 Technological Development in Heat Exchangers 3 09:20 〜 10:40
B211 Condensing Heat Transfer and Flow Characteristics in Horizontal Mini Triangular Channel

◯ AKIYAMA Makoto (Kobe Univ.), ASANO Hitoshi, ASANO Tomonori, MARUYAMA Kazuhisa (Noritz)
B212 A Study on Quality Measurement in Refrigeration Cycle
Quality measurement of two-phase flow by applying multiple narrow tubes

◯ IYODA Kai (Shizuoka Univ.), NISHIHATA Katsuya, FUKUTA Mitsuhiro, MOTOZAWA Masaaki, SASAKI Atsuya, MAKIMOTO Naoya (DENSO)
B213 Gas-Liquid Distributions of Refrigerant Flows in Multi-pass Channels with Vertical Headers
Comparisons of pressure losses and gas-Liquid distributions measured with R410A and R134a

◯ SAWAHARA Fuuka (Mie Univ.), ARAKI Yuto (Former Mie Univ.), ONODERA Ayumi (Toshiba Carrier), HATADA Takafumi, HIROTA Masafumi (Mie Univ.), MARUYAMA Naoki, NISHIMURA Akira
B214 Equalization of Refrigerant Flow in EV Heat Pump Evaporator using Removable Dividing Control Board

◯ YAMAMURA Shu (Keihin), TSUNODA Isao, TAKEYAMA Tomoyuki, MINE Hokuto (Keihin Thermal Technology)

B22 Technological Development in Heat Exchangers 4 11:10 〜 12:30
B221 Visualization of Evaporation Process of Refrigerant Gas-liquid Two-phase Flow Passing Through a Fine Rectangular Groove

◯ MIYAKE Haruki (Mie Univ.), MARUYAMA Naoki, TAJIMA Kengo, HAMAKAWA Yuta, SHIMANAKA Ryota, NISHIMURA Toshiki, TAKIGUCHI Koji (Fuji Electric), NAKANO Akira, HIROTA Masafumi (Mie Univ.)
B222 Boiling Heat Transfer on an Aluminum Fabricated by a Laser Interference Surface Structuring

◯ OTSUBO Yuma (Nagasaki Univ.), HASIMOTO Yoshiki, HAMASAKI Shouta, KONDOU Chieko, MOTOMURA Fumitaka, IWASAKI Shun
B223 Forced Convection Subcooled Boiling Heat Transfer with High Porosity Sintered Fiber on the Surface

◯ OTOMO Yusuke (UEC), SANTIAGO-GALICIA Edgar, FUKUJU Riku, ORITO Kenji (Mitsubishi Materials), TAKITA Kenji, SAIWAI Toshihiko, ENOKI Koji (UEC)
B224 Molecular Dynamic Simulation Predicting Saturation Densities and Surface Tension for Ethylene and HFO Refrigerants

◯ MIURA Takehiro (Nagasaki Univ.), NUMADATE Takumi, OKUMURA Tetsuya, IWASAKI Shun, KONDOU Chieko

B23 Technological Development in Heat Exchangers 5 13:30 〜 14:50
B231 Molecular Dynamics Study on the Influences of Nanostructures on Interfacial Thermal Energy Transport Including Phase Change

◯ SHIBAHARA Masahiko (Osaka Univ.)
B232 Falling Film Evaporation Heat Transfer of R134a and R1233zd(E) on a Horizontal Low Finned Tube with Thermal Spray Coating

◯ UBARA Tsutomu (Kobe Univ.), SUGIMOTO Katsumi, ASANO Hitoshi
B233 Measurement of Evaporation Heat Transfer Coefficient in Falling Film on Horizontal Tube having Porous Bodies

◯ FUKUDA Sho (Kyushu Sangyo Univ.), MIYATA Kazushi (Fukuoka univ.), UMEZAWA Shuichi (TEPCO)

Zoom-C

C21 Low Temperature Application and Technology for Food and Biological Materials 1 09:00 〜 10:40
C211 Social Implementation Modeling of Cold Chain System for the Markets of ASEAN Member States

◯ SAGARA M Yasuyuki (Food Kansei Communications)
C212 Changes between Tissue Structure and Electrical Properties in the Blanching and Freezing for Bean Sprouts

◯ ANDO Haruki (Gifu Univ.), IMAIZUMI Teppei
C213 The Effect of Supercooled Storage on Quality of Fresh-cut Apple

◯ OSUGA Rei (Iwate Univ.), KOIDE Shoji, SAKURAI Misaki, ORIKASA Takahiro, UEMURA Matsuo
C214 Effect of Aomori Hiba Essential Oil Incorporated Gelatin-Konjac Glucomannan Based Coating on Quality of Peach Fruits during Cold Storage

◯ KOGA Arisa (Kyushu Univ.), TANAKA Fumina, TANAKA Fumihiko

C22 Low Temperature Application and Technology for Food and Biological Materials 2 11:10 〜 12:30
C221 Effect of Food Polymer on the Quality of fFreeze-dried Soup Solid

◯ SOGABE Tomochika (Hiroshima Univ.), OHIRA Koichi (Nihon BUCHI), HAGURA Yoshio (Hiroshima Univ.), KAWAI Kiyoshi
C222 Heat Transfer Enabled by using Ice Slurry during Cooling and Thawing of Fish -Influence of the Shape of Fish Body-

◯ MAEKAWA Ryunosuke (TUMSAT), NAKAJIMA Yuto, POUDYAL L Rajib, WATANABE Manabu, SUZUKI Toru
C223 Life Cycle Assessment of Environmental Load during Distribution of Imported Salmon

◯ CHE Mire (Tokyo Univ. of Marine Science and Technology), WATANABE Manabu, SUZUKI Toru
C224 Effect of Post Harvest Treatment of Fish on Initial Freezing Temperature

◯ OZEKI Akihiro (TUMSAT), WATANABE Manabu, SUZUKI Toru

C23 The novel technology for the cold chain in next generation 1 13:30 〜 15:10
C231 What Developments are Required to Achieve Truly Sustainable Cold Chain?

◯ WATANABE Manabu (TUMSAT)
C232 Technical Progress of Cold Chain Equipment in China

◯ TIAN Changqing (Chinese Academy of Sciences)
C233 Cold Chain as a Factor of Progression of Frozen Food
Suggestion to Future Cold Chain from Frozen Food Manufacturers

◯ OTSUJI Akihide (JFFA)
C234 Effect of Microfabricated Cooling Surface on Frost Crystal Generation

◯ TAGISHI Mikiko (Fuji Electric), OHKUBO Hidetoshi (Tamagawa Univ.), NAKAMURA Shingo (Fuji Electric), AGUI Haruka (Tamagawa Univ.)

Zoom-D

D21 Heat and Mass Transfer in Solid-Liquid Phase Change 1 09:40 〜 10:40
D211 Freezing of Supercooled Water by Applying Ultrasonic Wave with an Existence of a Single Bubble
1st Report: Difference by sustaining condition of a bubble, power output of ultrasonic wave and bubble diameter

HACHIYA Takayuki (Sony), ◯ OKAWA Seiji (Tokyo Tech), HOZUMI Tsutomu
D212 Solidification Heat Transfer Characteristics of Ice Slurry Flowing in a Circular Tube

◯ MORIMOTO Takashi (Aoyama Gakuin Univ.), OGURO Shin (Keio Univ.), KUMANO Hiroyuki (Aoyama Gakuin Univ.)
D213 Flow Behavior of Ice Slurry with Bubbles

◯ NAKAZAKI Ryota (Shinshu Univ.), KANEKO Syuta, ASAOKA Tatsunori

D22 Heat and Mass Transfer in Solid-Liquid Phase Change 2 11:10 〜 12:30
D221 Continuous Generation of Ice Containing Ozone MBs due to Cycle Reversal of Belt Velocity (Concentration of ozon water in simulated ice slurry)

◯ KUROIWA Yuta (Chuo Univ.), INABA Youtaro, SATO Takumi, MATSUMOTO Koji
D222 Mixed Convective Heat Transfer Characteristics of Emulsion on Vertical Heating Surface

KIM Joungmin (Okayama Univ.), ◯ KINARI Ryotaro, YAMADA Yutaka, ISOBE Kazuma, HORIBE Akihiko
D223 Heat Transfer Characteristics of Erythritol Slurry for Medium and Low Temperature in Cooling Pipe

◯ SAKAMOTO Ayumi (Shinshu Univ.), ABE Shunsuke, INAGAKI Hiroyuki, ASAOKA Tatsunori
D224 The Effect of Solid Fraction on Flow Characteristics of Erythritol Slurry as Heat Medium for Medium/ Low Temperature Thermal Utilization

◯ SATO Keita (Shinshu Univ.), ABE Shunsuke, INATSU Kenta, ASAOKA Tatsunori

D23 Industrial Heat Pump 1 13:30 〜 14:50
D231 Innovative Energy Saving Technology Applied “Heat-recycle” at Concentrating Waste Water and Volume Reduction Process

◯ MATSUNAGA Yui (Sasakura Engineering), SAKAGUCHI Katsutoshi (JEHC), FUKUNAGA Hiroshi
D232 Thermodynamic Analysis for Refrigerant Selection of High Temperature Heat Pump Cycles

◯ KAIDA Takenobu (CRIEPI)
D233 Thermodynamic Analysis of Heat Pump Integration into Drying Process

◯ KAIDA Takenobu (CRIEPI), BEUCHER Yannick (EDF), DE CARLAN Florence, FOURMIGUE Jean-Marie
D234 Integrated Simulation Technology of Industrial Heat Pump
2nd Report: Development of industrial heat pump simulator

◯ ICHIKAWA Akihiro (Waseda Univ.), SUZUKI Takaoki, CHON Jonsu, MIYAOKA Yoichi, SAITO Kiyoshi

Zoom-E

E21 Technologies of Desiccant, Adsorption, Absorption and Chemical Reaction 1 09:40 〜 10:40
E211 Vapor Absorption Characteristics on a Hydrophobic Flat Type Membrane-Based Absorber Used for an Absorption Refrigeration System

◯ HIRATA Ryusuke (The Univ. of Tokyo), HE Jiacheng, DANG Chaobin, HIHARA Eiji
E212 Absorption Performance of Absorbents Suitable for Absorption Refrigerator for Automobiles

◯ EBATA Yusuke (Aisin Seiki), TSUBOUCHI Osamu, INADA Takaaki (TDU・AIST), TAKEMURA Fumio (AIST), DANG Chaobin (Univ. of Tokyo), HIHARA Eiji (NIAD-QE)
E213 Crystallization Temperature of the Working Fluid LiBr - H2O - 1-Propanol for Absorption Refrigerator to Generate Below-zero Brine

◯ ISOJIMA 　 Sho (HIT), NODA 　 Hidehiko, MASANO Takayuki (NTEC)

E22 Technologies of Desiccant, Adsorption, Absorption and Chemical Reaction 2 11:10 〜 12:30
E221 Adsorption/Desorption Behavior in Desiccant Wheel under Unsteady-heat Input

◯ TSUJIGUCHI Takuya (Kanazawa Univ.), SAITO Keigo, OSAKA Yugo, KODAMA Akio
E222 The Study of the Energy Saving System for the Dehumidifier of the Dry Room of All Fresh Air System

◯ NAGASAWA Masatoshi (SHINRYO), MIKAMI Hideto, SAWARA Makoto
E223 Pore Network Modelling Study on Water Vapor Transport in Porous Desiccants

◯ YU Lili (Univ. of Tokyo), HSU Wei-Lun, DAIGUJI Hirofumi
E224 Kinetic Analysis of Water Confined in Metal-Organic Framework MIL-101 by Molecular Dynamics Simulations

◯ FEI Shubo (Univ. of Tokyo), HSU Wei-Lun, DAIGUJI Hirofumi

E23 Technologies of Desiccant, Adsorption, Absorption and Chemical Reaction 3 13:30 〜 14:50
E231 Performance Prediction of Adsorption Heat Transformer Cycle using Low Heat Capacity Adsorption Reactor

◯ HAMAMOTO Yoshinori (Kyushu Univ.), ADACHI Yuma
E232 Research and Development of Low-Cost Adsorption Heat Pump using Natural Mesoporous Material
12th Report: Performance comparison of corrugate and plate fin-tube heat exchangers

◯ HE Fang (Hokkaido Univ.), NAGANO Katsunori, TOGAWA Junya (Nihon Netsugen System)
E233 Study on Adsorption Desalination using Natural Mesoporous Material
1st Report: Experiments of desalination using small experimental apparatus

◯ IZAWA Mitsuki (Hokkaido Univ.), HE Fang, NAGANO Katsunori, TOGAWA Junya (Nihon Netsugen System)
E234 Development of Heat Battery Material Driven by Air as Operating Medium

◯ KUBOTA Mitsuhiro (Nagoya Univ.), WADA Kazusa, YAMASHITA Seiji, KITA Hideki