A31 Technological Development in Heat Exchangers 2 09:00 〜 10:40Chairperson:ENOKI Koji (The University of Electro-Communications) |
|
---|---|
A311 |
The characteristics of forced convective boiling heat transfer of ammonia in plate heat exchanger with aluminum heat transfer surface
|
A312 |
Evaluation of Evaporation Heat Transfer Characteristics in Layered Micro-channel Heat Exchangers
|
A313 |
An experimental study of pool boiling on horizontal tubes of low GWP binary mixture refrigerants
|
A314 |
Experiment on Evaporation Heat Transfer Characteristics of Falling Film on Vertical Plate
|
A315 |
Experimental Study on Evaporation Heat Transfer Characteristics of Shear-driven Liquid Film Flow on a Horizontal Heating Surface
|
A32 Technological Development in Heat Exchangers 3 11:00 〜 12:20Chairperson:MIYATA Kazushi (Fukuoka University) |
|
---|---|
A321 |
Varying aspect ratios and hydraulic diameters for heat transfer enhancement of bubbly flows in microchannels
|
A322 |
Effect of Heating Method on Boiling Heat Transfer Characteristics in Horizontal Triangular Mini-Channel
|
A323 |
Evaporative Heat Transfer Characteristics by Heating with Heating Medium in Horizontal Multiport Tubes
|
A324 |
Enhancement of pipe boiling heat transfer using longitudinal low thermal conductivity grooves
|
A33 Technological Development in Heat Exchangers 4 13:20 〜 14:40Chairperson:JIGE Daisuke (Tokyo University of Marine Science and Technology) |
|
---|---|
A331 |
Effect of tube arrangement on thermal hydraulic characteristics of finless heat exchanger with small diameter tubes
|
A332 |
Circuitry optimization and parametric study on fin-tube evaporators for maximizing COP
|
A333 |
Heat transfer experiment on the air side of a condenser using sintered porous metal fiber
|
A334 |
Simulation Analysis of Porous Material with Sintered Metal Fibers for Outside Tube Fins
|
A34 Technological Development in Heat Exchangers 5 15:00 〜 16:40Chairperson:HAMAMOTO Yoshinori (Kyushu University) |
|
---|---|
A341 |
Gas-Liquid Distributions of Refrigerant Flows in Multi-pass Channels with Vertical Headers
Attempt to improve uniformity of liquid distribution under heated condition |
A342 |
Experiment on condensation heat transfer of Binary refrigerant mixture R32/R1234yf in a multiport tube
|
A343 |
Condensation heat transfer coefficient of a mixed refrigerant R454C flowing in a horizontal rectangular mini-channel
|
A344 |
Numerical simulation of condensation flow of a refrigerant HFC134a in a horizontal rectangular mini-channel
|
B31 Heat and Mass Transfer in Solid-Liquid Phase Change 1 09:20 〜 10:40Chairperson:ASAOKA Tatsunori (Shinshu University) |
|
---|---|
B311 |
Trial production and characteristic measurement of latent heat emulsion as a phase change cold storage material
|
B312 |
Freezing behavior of the liquid bridge formed between hydrophilic surfaces
|
B313 |
Frost growing on surfaces of a single ice crystal with a specified crystal orientation
|
B32 Heat and Mass Transfer in Solid-Liquid Phase Change 2 11:00 〜 12:20Chairperson:YAMADA Yutaka (Okayama University) |
|
---|---|
B321 |
Investigation of the Effect of Tween 80 Addition on the Aggregation Characteristics of Ice Slurry during Long-term Ice Storage
|
B322 |
Growth Characteristics of Ice and Hydrate Layer Formed from Aqueous Solutions Flowing in a Rectangular Channel
|
B323 |
Themophysical properties and phase change behaviour of semiclathrate hydrates formed with asymmetric quaternary ammonium salts
|
B324 |
Study on fluidization of PCM and glass beads in fluidized and packed bed
|
B33 Heat Pump for Co-creation of Future Society 1 13:20 〜 14:40Chairperson:MATSUDA Kenji (Mitsubishi Heavy Industries Thermal Systems・Waseda University) |
|
---|---|
B331 |
Concept of Heat Pump Vision 2030s
|
B332 |
Overview of social issues heat pumps can solve
|
B333 |
A Discussion on the Roles of Future Heat Pumps from the Demand Side Perspective
|
B334 |
Considering a Sustainable Heat Pump Supply Chain
What should be done to keep heat pump equipment sustainable? |
B34 Heat Pump for Co-creation of Future Society 2 15:00 〜 16:40Chairperson:MATSUDA Kenji (Mitsubishi Heavy Industries Thermal Systems・Waseda University) |
|
---|---|
B341 |
Next-Generation Heat Pump Technology Vision
Direction of Overall Optimization |
B342 |
Novel performance monitoring technique for real-time estimation of end-user capacity supplied by vapour compression systems
|
B343 |
Development of Air-conditioner and refrigeration systems used Oilfree turbo Compressors
|
B344 |
Next generation performance standard for AC/HP
Consideration for carbon neutral and digital transformation in standards to promote higher efficiency |
B345 |
International heat pump prospective
Current status and outlook for the market and regulation |
C31 Simulation Technology for Refrigeration, Air-conditioning and Water Heating 1 09:20 〜 10:40Chairperson: NONAKA Masayuki (Hitachi-Johnson Cntrols Air-Conditioning, Inc.) |
|
---|---|
C311 |
Development and utilization of LCCP simulator
|
C312 |
Development of a model for predicting air-conditioning power consumption in offices using machine learning.
|
C313 |
Development of the industrial heat pump integrated simulator
2nd Report:Library functions installed in the industrial heat pump integrated simulator |
C314 |
Analysis and optimization of energy consumption of town hall building in snowy and cold region
|
C32 Simulation Technology for Refrigeration, Air-conditioning and Water Heating 2 11:00 〜 12:20Chairperson: TAIRA Shigeharu (Daikin Industries, LTD.) |
|
---|---|
C321 |
Demand Response of an Individual Air-Conditioning System Based on Model Predictive Control
|
C322 |
Dynamic Modeling and Control Design of Centrifugal Chillers
|
C323 |
Study on PID Gain Automatic Adjustment Function in Air Conditioning Control
PartⅢ:Performance Verification in Actual Air Conditioning Equipment |
C33 Simulation Technology for Refrigeration, Air-conditioning and Water Heating 3 13:20 〜 14:40Chairperson: HIGASHIIUE Shinya (Mitsubishi Electric Corp.) |
|
---|---|
C331 |
Study on Productivity Prediction of Artificial Light-Type Plant Factories Based on Thermal Environmental System Analysis
|
C332 |
Reduction of irregular temperature distribution for a pharmaceutical warehouse with the Dirivent system
Evaluating the effectiveness of the Dirivent system by the experimental observation |
C333 |
Energy and exergy performance comparison of cascade refrigeration system (CRS) using low GWP refrigerants
Thermodynamic analysis of CRS for low/ultra low temperature applications |
C334 |
Effective Utilization of Unused Waste Heat from Chillers for Data Centers
|
C34 Simulation Technology for Refrigeration, Air-conditioning and Water Heating 4 15:00 〜 16:00Chairperson: YAMAGUCHI Seiichi (Waseda University) |
|
---|---|
C341 |
Numerical analysis on effect of gravity on gas-liquid distribution at branch of multi air conditioner
|
C342 |
A supervised machine learning approach for predicting void fraction
|
C343 |
The development of drift-flux model considering flow patterns in smooth and macro tubes for void fraction prediction
|
D31 Low Temperature Application and Technology for Food and Biomaterials 1 09:20 〜 10:40Chairperson: MIYAO Norio(Toyo College of Food Technology) |
|
---|---|
D311 |
Toward a better understanding of softening in frozen broccoli
Effect of low temperature during harvesting time on tissue structure |
D312 |
Study on crystallization and precipitation of lactose in ice cream at sub-zero temperature
|
D313 |
Effect of Temperature and Humidity Environment on Vegetables Freshness in Long-Term Storage.
PartⅡ. Cell observation of Carrot and Cabbage. |
D314 |
Correlation Between the Temperature Change in the Refrigerator Freezing Room and How Frost Forms on Food
Haier Asia R&D Co.,Ltd |
D32 Low Temperature Application and Technology for Food and Biomaterials 2 11:00 〜 12:20Chairperson: ARAKI Tetsuya(The University of Tokyo) |
|
---|---|
D321 |
Effect of supercooled freezing on ice crystals in storage
|
D322 |
Investigation of a standard sample focusing on frosting on food surface for frozen storage test
|
D323 |
Detection of Core Rot Symptom of Japanese Pear Using Biospeckle
|
D324 |
Simulation of gas migration in persimmon fruit based on X-ray CT mapping information
|
D33 Low Temperature Application and Technology for Food and Biomaterials 3 13:20 〜 14:20Chairperson:D331~D332:NAKAZAWA Naho, D333:WATANABE Manabu(Tokyo University of Marine Science and Technology) |
|
---|---|
D331 |
Separation of functional components of plant materials by freeze concentration
|
D332 |
Effect of instant killing with ice slurry on pH, K-value and ATP-related compounds in fish meat.
|
D333 |
Influence of Various Factors on the Sensory Properties of Frozen Mackerel
|
D34 Utilization Technology of Ground Source Heat 2 15:00 〜 16:20Chairperson:TANAKA Saburo (Nihon University) |
|
---|---|
D341 |
Performance Analysis of Double Spiral Tube Ground Heat Exchangers Based on Measurement Data
|
D342 |
Performance prediction and investigation on potential of application of ground source heat pump system applying H-type PC pile ground heat exchanger
|
D343 |
Development of an integrated design tool for ground source heat pump systems
|
D344 |
Analysis of Heat Recovery Effectiveness of Geothermal Heat Recovery Heat Pump Systems
|
E31 Thermal Energy Control System of EV 1 09:00 〜 10:40Chairperson:MAITA Hiroshi(Hitachi.com) |
|
---|---|
E311 |
Unveiling unique strategy of tardigrades to survive extreme environments including space
|
E312 |
Experimental Study of Desiccant-Coated Heat Exchanger for Air-conditioner of Electric Vehicles
|
E313 |
Heating problems in electric vehicles and the potential of heat pumps
|
E314 |
Study on Consideration of Direct Expansion System for Environmental Laboratory
Refrigerant distribution method for evaporator |
E32 General Session/International Session 7 11:00 〜 12:20Chairperson: MIYARA Akio (Saga University) |
|
---|---|
E321 |
Air infiltration/exfiltration assessment of vehicle cabin using fan pressurization/depressurization experiments and tracer gas method
|
E322 |
Effect of ventilation mode on the concentrations of CO2 and particulate matter in the vehicle cabin
|
E323 |
Features and Performance of One-packaged Air Conditioners with Ventilation Cooling Heating and Humidification
Improving marketability and energy efficiency by integrating ventilation and air conditioning and using the latent heat of water |
E324 |
Design and Performance Analysis of a High efficient Continuous Waste Liquid Distillation and Water Recovery System Utilizing Vacuum and Heat Pump Technology
|
E33 Sustainable Next Generation Refrigerating System Technology 1 13:20 〜 14:40Chairperson:ZHANG Li(Criepi.Denken) |
|
---|---|
E331 |
Development of remote refrigerant leak detection system using machine learning
The 1st Report - Detection Technology for Applied AC Systems without SC sensor - |
E332 |
Heat pump technology of vending machines
|
E333 |
CO2 refrigerator equipped with large-sized Scroll and Rotary Compressors
|
E334 |
Multilayered Vertical Duct-type Ventilation System for Heat Exchange and Air Purification
Part 2: Effect of Duct Installation Direction on Heat Exchange Efficiency and Particle Removal Performance |
E34 Sustainable Next Generation Refrigerating System Technology 2 15:00 〜 16:40Chairperson:NAGATA Jyunichro(Sanki.Eng) |
|
---|---|
E341 |
Study on Miscibility for Refrigerant and Behavior on Refrigeration cycle of Refrigeration Oil
2nd Report: Behavior of Refrigeration Oil on Slow Condtion |
E342 |
Realization of passive daytime radiative cooling materials whose temperature drop below the ambient temperature under direct sunlight and those social implementation
|
E343 |
Application of Low-GWP Refrigerants to Centrifugal Chillers and Development of Technologies for Higher Performance
|
E344 |
Numerical Study on Conditions for Causing Supercharging at the Second Cylinder in Two-stage Compressor
|
E345 |
Analysis of heat transfer efficiency of low GWP refrigerant mixtures involving HFC32, HFO1234yf and CO2 for low-temperature applications
|