2024/09/05 (Day 2)

A室

A21 Technological Development in Heat Exchangers 2 09:00 〜 10:40

Chairperson: HAMAMOTO Yoshinori (Kyushu University)
A211 Effect of refrigerant oil on falling-film evaporation heat transfer characteristics of ammonia

◎ AKADA Ikuro (Mayekawa Mfg. Co., Ltd.), NISHIDA Kosaku, INOUE Norihiro (Tokyo University of Marine Science and Technology)
A212 Flow Characteristics of Refrigerant-Oil Mixtures in Parallel Mini-Channels Utilizing Communication Paths

◎ MOCHIZUKI Takeshi (UEC), NISHIDA Kosaku (MAYEKAWA MFG. CO., LTD.), AKADA Ikuro, ENOKI Koji (UEC)
A213 Condensation heat transfer of R1234ze(E) in a plate heat exchanger at high temperature

◎ WADA Shinjiro (KSU), FUKUDA Sho, MIYATA Kazushi (Fukuoka Univ.), UMEZAWA Shuichi (TEPCO)
A214 Heat transfer characteristics of a deep-ocean water air conditioner system using fan coil unit

◎ IDA Haruki (Saga Univ.), ARIMA Hirofumi
A215 Development of spray heat transfer equipment using water-Al2O3 nanofluids in fin-and-tube heat exchangers

CHANG Tong-Bou (National Chiayi University, Taiwan.), ◯ LIN Chih-Ting

A22 Technological Development in Heat Exchangers 3 11:00 〜 12:20

Chairperson: FUKUDA Sho (Kyushu Sangyo University)
A221 Boiling heat transfer and pressure drop of refrigerant in a microfin tube

◎ YUUKI Shimohira (Saga University), SUGITA I Wayan, RIKI Kawakami, KEISHI Kariya, AKIO Miyara
A222 Study of boiling heat transfer and flow behavior in a horizontal circular tube of R1336mzz(E)

◯ KASAI Akihiro (NDA), YAMADA Shunsuke, FUNAMI Yuki, NAKAMURA Hajime
A223 Evaporation Heat Transfer and Pressure Drop of R1234yf inside a Small- diameter Microfin Tube
－Evaporation Characteristics in Range of Low Mass Velocities－

◎ HIROSE Masataka (NIT, Toba college), INOUE Norihiro (Tokyo University of Marine Science and Technology), MISHIMA Fumiya (KMCT corporation)
A224 Effect of liquid flow rate on liquid film behavior and heat transfer in shear-driven liquid film flow

◎ NAKANO Takuya (Univ. Hyogo), HIROKAWA Tomoki, KAWANAMI Osamu

A23 Technological Development in Heat Exchangers 4 13:20 〜 15:20

Chairperson: NAKAMURA Hajime (National Defense Academy of Japan)
A231 Pressure Drop during Flow Boiling and Condensation of Low GWP Zeotropic Mixture in a Plate Heat Exchanger

◎ HASAN AFNAN (Graduate School of Science and Engineering, Saga University, Saga, 8408502, Japan), NAGATOSHI YUJIRO, MIYARA AKIO (Department of Mechanical Engineering, Saga University, Saga, 8408502, Japan)
A232 Condensation heat transfer characteristic of a mixed refrigerant R454B in a horizontal rectangular mini-channel

◎ HASHIMOTO Itsuki (Fukuoka University), MIYATA Kazushi, GAO Lei
A233 Evaluation of wall superheat at onset of nucleate boiling of non-zeotropic mixture refrigerant

◎ SHOTA Akai (Kobe University), KATSUMI Sugimoto, HITOSHI Asano
A234 Comparison of the conventional and ANN-based predictive models for the prediction of flow boiling heat transfer coefficient of low GWP refrigerants using the heat transfer database

◎ HASIB Md Ikramul (Graduate School of Science and Engineering, Saga University, 1 Honjo-machi, Saga, 840-8502, Japan), HAKIMATUL Ubudiyah, TAKACHI Katsuaki, MIYARA Akio (Department of Science and Engineering, Saga University, 1 Honjo-machi, Saga, 840-8502, Japan)
A235 Experimental evaluation of vertical boiling flow in a circular channel and prediction of boiling heat transfer coefficient by deep learning

◎ NAKANO Hayato (UEC), KINJO Tomihiro (JAXA), SEI Yuichi (UEC), OUCHI Takafumi (Fukuoka Industrial Technology Center), GIANNETTI Niccolo (UEC), SAITO Kiyoshi (Faculty of Science and Engineering, Waseda University), ENOKI Koji (UEC)
A236 An experimental study on condensation heat transfer of HFO-1234yf and R-134a inside a flattened tube and a circular tube

◯ CHIEN Liang-Han (National Taipei University of Technology), TSAI Wei-Jen, TSAI Mu-An, TSAI Yao-Hong

B室

B21 Present Status and Future Development of Compressors 1 09:00 〜 10:40

Chairperson: KIMATA Yoshiyuki (Mitsubishi Heavy Industries Thermal Systems, Ltd.)
B211 Reduction of Re-Expansion Loss for CO2 Scroll Compressor

◯ TSUCHIYA Takeshi (Hitachi, Ltd.), CHIKANO Masatsugu, ONUMA Atsushi (Hitachi Global Life Solutions, Inc.)
B212 Friction Coefficient of Thrust-Slide Bearings in Scroll Compressors with Metal Matrix Composites

◎ TAO Yuto (OECU), HAZAMA Daiki, ANAMI Keiko, TAKAGI Yoshio (Advance Composite Co.), HATTORI Jun'ichi (dvance Composite Co.)
B213 Experimental Study of Oil Film Pressure between Scroll Wraps of Scroll Compressor (Effect of Mean Radius of Curvature)

◎ NOMA Kengo (OECU), ANAMI Keiko, NISHIO Tsubasa
B214 Application of thermo-hydrodynamic lubrication analysis to predict oil film and bearing temperature on reciprocating　compressor crankshaft main bearings

◯ OKU Tatsuya (mayekawa mfg. Co., Ltd.), TSUJI Takuma, SATO Hideaki, YAMAGUCHI Katsuhiro, IKEDA Yasuyuki
B215 Development of Quality Measurement Device with Multiple Small Holes

◎ KAGAMI Rintaro (Shizuoka University), HAGIWARA Yusuke, FUKUTA Mitsuhiro, MOTOZAWA Masaaki

B22 Present Status and Future Development of Compressors 2 11:00 〜 12:20

Chairperson: MOTOZAWA Masaaki (Shizuoka University)
B221 Reduction of Suction Gas Heating of Rotary Compressor with Low-Pressure Chamber

◯ ENDOH Kazuhiro (Hitachi), NAGATA Shuhei, AKIZAWA Takehiro (Hitachi Global Life Solutions), NAKAMURA Kosaku
B222 Building A Prediction Model of The Oil Circulation Ratio for Scroll Compressor

◯ KAWABATA Shinichi (Daikin), NISHIMURA Kosuke
B223 Development of PAG refrigeration oil for refrigerant leak detection

◯ HIROSE Jumpei (Idemitsu Kosan), MATSUMOTO Tomoya, KITA Shota, MAEZONO Hiroki
B224 Lubrication characteristics of POE refrigeration oil in fluorinated refrigerant atmosphere

◯ TAKAKI Tomohiro (ENEOS), KAWAAGUCHI Masaki, KIMURA Takafumi, MIZUTANI Yuya

B23 Seminar on Compressor Technology 1 13:20 〜 15:20

Chairperson: TOJO Kenji (Waseda University / TOJO R&D OFFICE), OKU Tatsuya (MAYEKAWA MFG. CO., LTD)
B231 Continuous rapid cooling and freezing equipment Thermo-Jack Rey

◯ TSUBATA Kouichi (MAYEKAWA MFG.CO.,LTD.)
B232 High efficiency compressor with Evolutionary Three-Dimensional Scroll

◯ YAMASHITA Takuma (Mitsubishi Heavy Industries, Ltd.), KIMATA Yoshiyuki (Mitsubishi Heavy Industries Thermal Systems, Ltd.), TAKASU Yogo, ITO Takahide (Mitsubishi Heavy Industries, Ltd.), SATO Hajime
B233 Overview of air conditioning systems achieved Zero energy building and expectations for component technologies

◯ MATSUI Nobuki (Daikin Industries)
B234 Thermal management technology trend in electric vehicle

◯ TAKEICHI Kota (DENSO), KUWAHARA Mikiharu, WATANABE Takayuki, ATSUSHI Inaba, KAZUHIRO Tada
B235 Development of water-soluble press oil for aluminum fin processing

◎ SHOGO Ito (Idemitsu Kosan), NOBUHIDE Tanino
B236 2024 Purdue Conference Summary Report

◯ TOJO Kenji (Waseda University / TOJO R&D Office)

C室

C21 Technologies of Desiccant, Adsorption, Absorption and Chemical Reaction 5 09:00 〜 10:40

Chairperson: TSUJIGUCHI Takuya (Kanazawa University)
C211 Efficient CO2 Capture Using Biomass-Derived Activated Carbon from Pine Cones

◯ LI Guangyao (Department of Advanced Environmental Science and Engineering, Faculty of Engineering Sciences, Kyushu University,), YU Hao, THU Kyaw, MIYAZAKI Takahiko
C212 Molecular Dynamics Simulation of Methane Adsorption and Diffusion in Cu-BTC: Insights into Adsorption Phenomena

◎ HAONAN Chen (Kyushu University), TAKAHIKO Miyazaki, THU Kyaw
C213 Modelling and case study on ionic liquid desiccant-based internally cooled deep dehumidifier for low-humidity industries

◎ CAO Bowen (Waseda University/Southeast University (China)), MAEDA Kento (Waseda University), MASUNO Katsuya, KIM Moojoong, YIN Yonggao (Southeast University (China)), SAITO Kiyoshi (Waseda University)
C214 Experimental performance of a liquid desiccant dehumidification system with woven gas–liquid contactors

◯ AKITA Tomoyuki (TOYOTA CENTRAL R&D LABS., INC.), YAMASHITA Masahiko, MOCHIZUKI Miyo, YAMASHITA Kyoka, KURAHASHI Tetsuo
C215 Dynamic characteristics of liquid desiccant air-conditioning system with different solution tank capacities

◎ KIZAWA Yoshihito (WASEDA University), TOKANO Atsuya (Graduate School of WASEDA University), NISIGUCHI Tsubasa, YAMAGUCHI Seiichi (WASEDA University)

C22 Heat Pump for Co-creation of Future Society 1 11:00 〜 12:20

Chairperson: MATSUDA Kenji (Waseda University)
C221 【Keynote】Next generation heat pump technology

◯ SAITO Kiyoshi (Waseda University)
C222 Machine learning models of fundamental transport phenomena for heat pumps design and control

◯ GIANNETTI Niccolo (The University of Electro-Communications), SEI Yuichi, ENOKI Koji, SAITO Kiyoshi (Waseda University)
C223 Actual measurement evaluation of CD value of commercial air conditioner using "Emulator-Type Load-Based Test Facility"

◯ MIYAOKA Yoichi (Waseda University), MIZUNO Ato, TAHARA Daiki (Waseda university), GIANNETTI Niccolo (University of Electro-Communications), SAITO kiyoshi (Waseda university)

C23 Heat Pump for Co-creation of Future Society 2 13:20 〜 15:20

Chairperson: MATSUDA Kenji (Waseda University)
C231 A Discussion on the Roles of Future Heat Pumps from the Demand Side Perspective, part 2

◯ OKAMOTO Hiroaki (JYURI), NAKAGAMI Hidetoshi, MIZUTANI Suguru
C232 Study of comprehensive evaluation index for home air conditioners

◯ NISHIMURA Kuniyuki (Waseda University/Mitsubishi Research Institute Inc.,), SAITO Kiyoshi (Waseda University), MATSUDA Kenji
C233 Survey on Heat Pump Diffusion Prospects

◯ TANAKA Satoru (HPTCJ), WATANABE Norihiro (JEHC)
C234 The role of heat pumps using renewable energy as a heat source

◯ MATSUDA Kenji (Waseda University), SAITO Kiyoshi
C235 Panel Discussion
Future Heat Pump Society with Next-Generation Refrigerants

◯ SAITO Kiyoshi (Waseda University)

D室

D21 Low Temperature Application and Technology for Food and Biomaterials 1 09:20 〜 10:40

Chairperson: MIYAO Norio (Toyo College of Food Technology)
D211 Suppression of drip amount after thawing by reflection of infrared radiation in latent heat during freezing
Quantitative method of frozen quality using Konnyaku and its application

◎ KINO Masato (ZERO FOOD)
D212 Effect of supercooling on ice crystal structure when carrots are frozen

◎ OKAMURA Riho (Tokyo university of marine science and technology), REDO Mark anthony, WATANABE Manabu
D213 Effect of instant killing on the quality of horse mackerel by ice slurry immersion
Impact of blood removal

◎ UEMA Tomotaka (Tokyo University of Marine Science and Technology), REDO A Mark, WATANABE Manabu
D214 Vacuum microwave thawing of frozen tuna

◎ OHMI Sayori (TUMSAT), REDO A Mark, ISHIKAWA Susumu (Hoshizaki), WATANABE Manabu (TUMSAT)

D22 Low Temperature Application and Technology for Food and Biomaterials 2 11:00 〜 12:20

Chairperson: KAWAI Kiyoshi (Hiroshima University)
D221 Comparison of methods for tissue observation of frozen-thawed fish meat to optimize thawing condition

◎ YAMADA Yui (Tokyo University of Marine Science and Technology), MARK A Redo, WATANABE Manabu
D222 Thawing of Frozen Tissue by Utilizing High-frequency Ultrasonic Wave
Control of Ultrasonic Power and Irradiation Period

◎ SAKAMOTO Kyoka (Kanazawa University), TADA Yukio, YOSHIOKA Hideaki (NIT, Ishikawa College)
D223 Development of Reference Materials for Evaluating Food Quality with the Aim of Evaluating the Performance of Industrial Freezers

◎ HOSHINAKA Takashi (TUMSAT), MITOMI Yuta, HARADA Kotoka (FFTech), KOBAYASHI Rika, WATANABE Manabu (TUMSAT), SUZUKI Toru (FFTech)
D224 Quality Evaluation of Scallop by Liquid Nitrogen Freezing

◎ SATO Riko (UGAS), HAYASHI Sota (IWATEUniv), SAKAMOTO Kosuke, YOSHINO Michiharu, MIKI Taichi

D23 Low Temperature Application and Technology for Food and Biomaterials 3 13:20 〜 14:20

Chairperson: WATANABE Manabu (Tokyo University of Marine Science and Technology)
D231 Freeze-concentrated glass transition and rheological properties of ice cream

◯ KAWAI Kiyoshi (Hiroshima Univ.), AOYAMA Haruka
D232 Development of high-quality household freezers and evaluation of their impact on various food quality characteristics

◯ YOSHIDA Yoshihiko (Haier Asia　R&D　Co.,Ltd), TANAKA Masaaki, IWAMOTO Tomoharu, TATENO Takaya, HOSHINO Hitoshi, JODO Kana (FFTech), KOBAYASHI Rika, SUZUKI Toru
D233 A novel method for analyzing the ice crystal shape from the curvature of ice crystals

◯ AHMED Shafi (Department of Food Science and Technology, Tokyo University of Marine Science and Technology), MATSUKAWA Shingo

D24 Advancement in HVAC&R Technologies in Asia 5 14:30 〜 15:30

Chairperson: Kyaw Thu (Kyushu University), YANG Tien-Fu (National Chin-Yi University of Technology)
D241 Heating energy saving strategy considering the thermal characteristics of radiant floor heating system

◯ YOON Dong-Hee (Sungkyunkwan University), SHIM Ji-Soo, SONG Doosam
D242 Improvement of Fault Detection and Diagnosis Accuracy and Efficiency through FDD Comprehensive Framework

◯ PARK Jun Kyu (Korea University), CHA Jae Hwan, YEON Sang Hun, LEE Kwang Ho
D243 Applicability and Energy Efficiency of Liquid Cooling Systems for Data Centers

◯ BYEON Sangwoo (Hanbat National University), MOON Joo Hyun, CHO Jinkyun

E室

E21 Heat and Mass Transfer in Solid-Liquid Phase Change 1 09:20 〜 10:40

Chairperson: YAMADA Yutaka (Okayama Univ.)
E211 Advanced Effective Utilization for Cold Heat of Waste Plastic Energy
1st report: Development the thermal driven ice slurry ice maker

◯ TANINO Masayuki (Takasago Thermal Engineering Co., Ltd.), MASUDA Masao, KAMATA Haruyuki, ORITA Hisayuki (Hachinohe Institute of Technology.), KOYAMA Toshie (Tokyo Denki University.), KUMANO Hiroyuki (Aoyama Gakuin University.)
E212 Advanced Effective Utilization for Cold Heat of Waste Plastic Energy
2nd report: Influence of addition of poly(vinyl alcohol) on aggregation of ice particles in ice slurry

◯ KOYAMA Toshie (Tokyo Denki University), SOMEYA Satoshi, KOBAYASHI Yoshihiro, TANINO Masayuki (Takasago Thermal Engineering Co. Ltd), ORITA Hisayuki (Hachinohe Institute of Technology), MORIMOTO Takashi (Aoyama Gakuin universuty), KUMANO Hiroyuki
E213 Study on Control Method of Ice Packing Factor of Ice Slurry

◯ IGARASHI Mizuki (Shinshu University), URAKI Jin, ABE Shunsuke, ASAOKA Tatsunori
E214 Adhesion strength of anionic surfactant-applied ice at various concentrations

◎ OGAWA Takuma (Chuo-University), MATSUMOTO Kouji, CHIWATA Mitsuki, ITO Koki

E22 Heat and Mass Transfer in Solid-Liquid Phase Change 2 11:00 〜 12:20

Chairperson: ASAOKA Tatsunori (Shinshu Univ.)
E221 【Keynote】latent heat storage for the effective heat utilization

◯ HORIBE Akihiko (Okayama University)
E222 Study on emulsion production method for low-temperature storage

◎ FUJIMOTO Shintaro (Graduate School of Okayama University), HORIBE Akihiko, YAMADA Yutaka, ISOBE Kazuma
E223 The research on cold energy storage in packed bed
Part 1 Thermal storage characteristics for different packed materials

◎ ZHU Chenhao (Hokkaido University), NAGANO Katsunori, KATSURA Takao, HE Fang

E23 Thermally Driven Technologies and Its Applications for Carbon Neutrality 1 13:20 〜 15:20

Chairperson: KUBOTA Mitsuhiro (Nagoya University)
E231 【Keynote】Decarbonization of heat by thermally driven heat pump technologies

◯ AKISAWA Atsushi (Tokyo Univ. of Agr. & Tech.)
E232 【Invited】3D printed adsorption bed for CO2 capture: Importance of good thermal management during adsorption process

◯ MIKSIK Frantisek (Nagoya University), KAJIRO Hiroshi (Japan Steel Corporation), KOTONE Hirotaka (Nagoya University), YAJIMA Tomoyuki, FUJIKI Junpei, KAWAJIRI Yoshiaki
E233 【Invited】Development of O2 enriched TSA process using CMS honeycomb rotor

◯ OSAKA Yugo (Kanazawa univ.), TSUJIGUCHI Takuya, KODAMA Akio, SAKAI Haruna (Seibu giken), FURUKI Keimei, INOUE Koji
E234 【Invited】Smart Thermal Energy Conversion Technology Using Solar Heat

◯ HAMAMOTO Yoshinori (Kyushu Univ.)